APPLICATIONS OF FUME HOOD

• Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.
• It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.

SALIENT FEATURES & CONSTRUCTION OF FUME HOOD
• Low Cost.
• Low Noise.
• User Friendly Ergonomic Design.
• Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
• Basic material is thick board wood front back top and exterior surfaces are covered with Formica. OR Cold rolled steel duly powder coated OR Stainless Steel (SS-304) (as ordered).
• All interior surfaces are sealed and checked for leakage.
• Work table is made of Stainless Steel (SS-304) and is fitted with a small S.S. sink with water tap connections.
• Working area is illuminated by fluorescent lighting fitted to the unit.
• The front door moves vertically up and down with concealed counter balanced weight.
• The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
• Height of the working table provides comfortable "SIT DOWN" working position for the operator.
• The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
• Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.